WorkBee CNC Mechanical Kit OX CNC Kit Upgrade Version DIY CNC Engraving Machine,CNC Milling Machine,Carving Machine tool

WorkBee CNC Mechanical Kit OX CNC Kit Upgrade Version DIY CNC Engraving Machine,CNC Milling Machine,Carving Machine tool

WorkBee CNC Mechanical Kit OX CNC Kit Upgrade Version DIY CNC Engraving Machine,CNC Milling Machine,Carving Machine tool

  • VendorBULK-MAN 3D Store
  • Volume Retail sales2 piece
  • Your PriceUS $485.00piece
  • ShippingFree Shipping
  • Product Rating5.0(2)

WorkBee CNC Machanical Kit with 4pcs Nema23 Stepper Motors

The WorkBee CNC Machine is the result of years of experience, feedback, and suggestions from selling the OX CNC Machine.

It has been designed from scratch, and can accurately cut foams, woods, plastics and aluminium to 0.2mm accuracy or better.

Functional engineering parts, toys, signs or anything else that can be imagined, can be made on the WorkBee CNC Router.

Compatible Material for Cutting/Milling:

  • Aluminum
  • Oak
  • Plexi Glass
  • Delrin
  • HDPE
  • Foam

The basic kit not including: Electronic parts as wire,Cable kits, Router Spindle,Drive board,Power supply,

working table etc and other Electronic kits.

1) The Picture you see below as what we sell. (All mechanical parts with 4pcs stepper motors)

2) Extrusions are new without tapped.

3) PDF Assembly Manual is available by email.

4) If you have any question about shipping cost, pls contact us to get the latest price.

(If you have any idea or question, please feel free to contact us first, will support you in the first time!)

Item No. Item Frame Size Working Area Picture show
CNC Mechanical Kit
BM-WB02 550X520mm
BM-WB03 550x770mm
BM-WB04 800x770mm
BM-WB05 800x1270mm
BM-WB06 1300x1270mm

Part List

Specs of Nema23 Stepper Motor:

  • Shaft Size: 1/4"
  • Step Angle: 1.8
  • Holding Turque: 1.26N.m
  • Rated voltage: 3.36A
  • Rated current: 2.8A

Dual Drive System:

The main request we got for the OX was for a lead screw driven version. The WorkBee has been designed from the ground up to incorporate this and more.

The WorkBee is available from regular size 500x750mm up to 1500x1500mm for both screw driven and belt driven!

The WorkBee CNC also has two different spoiler board configurations. One for shallow work up to 27mm deep, and a lowered setup up to 47mm deep. Having this option is beneficial, if the plan is to only cut thin materials, it is a waste of rigidity to have the Z-Axis reach down more than needed. The Screw driven version, right image above, shows the lowered configuration.

OX TO WorkBee:

The WorkBee and OX use many similar parts. It comprises of the additional or different parts needed to build a WorkBee. It will require a complete strip down of the OX CNC Machine, and re-built as if the WorkBee was bought from new. It also includes some additional parts, and changes to the full kit version of the WorkBee. For some parts. even though they are used on the OX and WorkBee, new parts are supplied with the kit. These include the nylon nuts and GT3 Belts. This is a size for size conversion, It will need the same size machine as your current OX and also what drive version of the WorkBee (Belt Or Screw).

WorkBee Kit Includes:

Z Travel Explained:

To clarify the Z Travel, this is not the max cutting depth or the travel range of the actuator. Z travel is the distance downwards it can travel before hitting the spoiler board supports.

The WorkBee has two spoilerboard support configurations. One with a travel of 66mm, and a lower one with a travel of 106mm. The reason for the two configurations is that if the machine is always used to cut thin materials, for accuracy reasons it is better to have the work piece as close to the Z-Actuator as possible, so in this case the machine should be setup in the higher 66mm travel configuration. The higher configuration has a Z travel of 66mm, with a 12mm spoiler board, this will reduce the Z travel to 54mm. In this case 54mm is maximum thickness of material that will fit on the machine. To calculate the max cutting depth for a chosen piece of material it is: Max Cutting Depth = Z travel – Material Thickness For instance a setup with a 12mm spoiler board, the max Z travel is 54mm, so when cutting into a material 30mm thick the max cutting depth would be: Max Cutting Depth = 54 – 30 = 24mm This means with a 30mm piece of material it would not be possible to cut it the whole way through. The max thickness that can be cut the whole way through is half the Z travel. So with a Z travel of 55mm, 27mm is the maximum thickness of material that could be cut the whole way through. And for the lower configuration the maximum thickness that can be cut the whole way through is 47mm

Electronic Combos Suit For WorkBee Functional Full Kit

Technical Specification:


Frame Size
750 x 750mm
750 x 1000mm
1000 x 1000mm
1000 x 1500mm
1500 x 1500mm

Working Area
550 x 520mm
550 x 770mm
800 x 770mm
800 x 1270mm
1300 x 1270mm

Z Height
54mm Or 94mm Travel, 27mm Or 47mm Workable depth, with a 12mm spoilerboard. The spoilerboard supports have two height configurations, these are the maximums for each configuration.


Drive System - ACME Lead Screws Or GT3 Timing Belts
Linear Guides - Polycarbonate wheels on anodised C-Beam V-Slot Extrusion.
Motors - NEMA23 175oz Stepper Motors (X, Y & Z)
Accuracy - 0.05 - 0.10mm (Screw Driven) Or 0.10 - 0.20mm (Belt Driven)

  • Ship to USA: 7-15 days
  • Ship to other countries: 10-35 days
  • Items will be shipped in 2-5 days after full payment.

Return Policy

  • 100% Return - Guarantee in 30 days
  • We accept returns for an exchange or refund within 30 days of the items delivery.
  • Items must be in their original condition, not worn or altered. We will not reimburse the return shipping.


  • We appreciate your kind cooperation with us. If you are satisfied with our items and services, please leave us a Positive Feedback & 5 Stars
  • 5 Stars is very important to us. If you\'re dissatisfied for any reason, please contact us before leaving negative feedback,
  • We will try our best to help to solve your problems until you are satisfied with your purchase from us!

Terms of Sale

  • Import duties, taxes and charge are not included in the product price or shipping charge. Those charges are the buyer\'s responsibility.
  • We usually will mark the goods for a low cost on the customs declaration and we are trying to help you minimize or avoid GST or V.A.T or other import taxes. But we cannot guarantee no tax charge as it is depends on your country\'s policy.
You should make sure that before you purchase a WorkBee CNC Mechanical Kit OX CNC Kit Upgrade Version DIY CNC Engraving Machine,CNC Milling Machine,Carving Machine tool you have already seen and browse the detail of the merchandise first. This way you will be sure that you're getting the proper product that may suit your needs. Since this WorkBee CNC Mechanical Kit OX CNC Kit Upgrade Version DIY CNC Engraving Machine,CNC Milling Machine,Carving Machine tool has top quality it is one of the better sellers in the market now and many people are recommending the product to their family and friends. These days the product is actually affordable for nearly everyone and it’s an excellent buy for the money. You don’t need cheaper products if it'll only sabotage your work and can not give you the sort of quality that you'll require in the merchandise. With the higher price you will be sure that your money will probably be worth spending in this product.