F19457-C DIY RC Drone Full Kit S600 Frame PIX 2.4.8 Flight Control 40A ESC 700KV Motor AT9S TX with Battery Charger XT60 Plug

F19457-C DIY RC Drone Full Kit S600 Frame PIX 2.4.8 Flight Control 40A ESC 700KV Motor AT9S TX with Battery Charger XT60 Plug

F19457-C DIY RC Drone Full Kit S600 Frame PIX 2.4.8 Flight Control 40A ESC 700KV Motor AT9S TX with Battery Charger XT60 Plug

  • VendorShenZhen MiaoZheng Technology Co., Ltd
  • Your PriceUS $365.00piece
  • ShippingFree Shipping

DIY RC Drone Full Kit S600 Frame PIX 2.4.8 Flight Control 40A ESC 700KV Motor AT9S TX with Battery Charger XT60 Plug

Product Listing :

S600 Super Hard Arm 4-Axis Rack Quadcopter Frame Kit * 1

JMT 40A Brushless ESC Speed Controller *4

HYD 3508 700KV 198W Disc Motor *4

15x5.5 3K Carbon Fiber Propeller CW CCW 1555 CF Props * 2 pairs

PX4 PIX 2.4.8 32 Bit Flight Controller Integrate PX4FMU PX4IO Safety Switch Buzzer 4G SD *1

UBLOX NEO-7M 7M GPS Module with Compass *1

CNC GPS Anti-interference Antenna Mount Holder Stent Case *1

8 Channel PPM Encoder *1

APM2.6 2.5 2.52 Power Module Current Module APM with 5.3V DC BEC *1

Thick Gold Plated 3.5mm Bullet Connector ( banana plug ) *12

5X Hook & Loop Fastening Tape *1

Radiolink AT9S 2.4G 10CH DSSS FHSS Transmitter R9DS 9CH Receiver Radio Controller S-BUS PWM * 1

IMAX RC B3 Pro Compact Balance Charger * 1

JMT 11.1V 4400MAH 30C 3S1P xt60 Plug * 1

Frame Kit Specifications:

Wheelbase: 600mmTripod height: 250mm Maximum available paddle: 15 inch Weight: 860g Upper and lower center plate middle height: 36mm

Pix 2.4.8 Spacifications :

Note:

Open source products, once sold, no return, if quality problems, Please return for repair . Does not provide one to one support. Buy carefully!

If you are using a PWM receiver, please ready a PWM / PPM converter.

Description:
- The board integrates with PX4FMU+PX4IO
- Pixhawk is with new 32 bit chip and sensor technology

Features:
- Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system;
- 14* PWM/ actuator output;
- Bus interface (UART, I2C, SPI, CAN);
- Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control;
- Provide automatic and manual mode;
- Provide redundant power input and fault transfer function;
- Color LED lamp;
- Multi tone buzzer interface;
- Micro SD to record flight data;

Processor:
- 32 bit 2M flash memory STM32F427 Cortex M4, with hardware floating point processing unit
- Main frequency: 256K, 168MHZ RAM
- 32 bit STM32F103 backup co processor

Sensor:
- L3GD20 3 axis digital 16 bit gyroscope
- LSM303D 3 axis 14 bit accelerometer /magnetometer
- MPU6000 6 axis accelerometer / magnetometer
- MS5611 high precision barometer

Interface:
- 5* UART, 1*compatible high voltage, 2*hardware flow control
- 2* CAN
- DSM/DSM2/DSM-X satellite receiver compatible input
- Futaba SBUS compatible input and output
- PPM signal input
- RSSI (PWM or voltage) input
- I2C
- SPI
- 3.3 and 6.6VADC input
- External USB MICRO interface

You have to ensure that before you get a F19457-C DIY RC Drone Full Kit S600 Frame PIX 2.4.8 Flight Control 40A ESC 700KV Motor AT9S TX with Battery Charger XT60 Plug you have previously seen and read the detail of the merchandise first. In this manner you may be sure that you are getting the proper product which will work for you. Since this F19457-C DIY RC Drone Full Kit S600 Frame PIX 2.4.8 Flight Control 40A ESC 700KV Motor AT9S TX with Battery Charger XT60 Plug has top quality it is one of the better sellers on the market now and several folks are recommending this product to their friends and family. These days the product is really affordable for nearly everyone and it’s a very good buy your money can buy. You don’t need cheaper products if it will only sabotage your projects and will not give you the sort of quality that you need in the merchandise. With the higher price you could be sure that your cash is worth spending in this product.