2000w 2KW Wind Power Second Generation Grid Tie Inverter 2000G2-WAL-LCD With inter Limiter and Dump Load Controller/resistor

2000w 2KW Wind Power Second Generation Grid Tie Inverter 2000G2-WAL-LCD With inter Limiter and Dump Load Controller/resistor

CLEARANCE SALE

Save US $60.87


  • VendorShanghai Tingen Electric Co., Ltd
  • List PriceUS $468.24piece
  • SaveUS $60.87piece13% off
  • Your PriceUS $407.37piece
  • ShippingFree Shipping
  • Product Rating4.0(0)
8.90380.72-427.4143.87321.23-355.9444.1882.2718.79-19.609.86 2000w 2KW Wind Power Second Generation Grid Tie Inverter 2000G2-WAL-LCD With inter Limiter and Dump Load Controller/resistor

NEW 2000W Wind Power Grid Tie Inverter

Max Efficiency:>92% MPPT Efficiency:99%

1. Low cost and easy installation 2. Directly connect to three phase wind turbine 3. Much better output waveform compare with similiar GTI 4. Improving the efficiency of the entire solar power system Overload protection ,Anti-island protection Short-circuit protection/Reverse polarity protection 5. AC output voltage and current THD<5%,PF>99%
This model grid tie has designed for wind turbines that put out 3 phases AC voltage. It can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can’t keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used.

Technical Data


Model 2000GW-WAL-LCD-S
Max. Power Output 2000W
Input AC/DC Voltage Range 45V ~ 90V
AC Output Voltage Range 190VAC ~ 260VAC
Output Frequency 46Hz~65Hz
Standby Power Consumption <0.5W
Total Harmonic Distortion <5%
Peak Inverter Efficiency 92%
Power Factor 0.99
Output Wave Form Pure Sine Wave
MPPT Efficiency 99%
Over Current Protection Yes
Over Temperature Protection Yes
Reverse Polarity Protection Yes
Anti-Island Protection Yes
Stackable Yes
Weight ( Kg) 6.5kg
Dimensions (W x H x D) 434 x 196 x 88 mm

(1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor.

(3) AC socket,This socket will connect the inverter to the public grid via the AC cable.

(4) Cooling fans.

(5) Input Terminals. This terminals will connect to the wind turbine.

Inverter Display Instruction

The Inverter display can show many information,The main interface of the display and the icons explainations are show above.

Set Menu:Choose the set menu icon on the main screen interface,click the confirm button to enter into the interface show below,In this interface,can set the LCD backlight always on or auto turn off backlight after 3 minutes no action.

The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid.Select the internal limiter mode,inverter will work under limiter mode,output power of the inverter will be determined by load power.Select the external limiter mode,inverter need a external limiter module working with it.For more details about the limiter function,pls contact supplier. ( this function only useful with limiter type inverter. )

Power View:

In this interface,the display shows real time power,PV input voltage, inside temperature,date and time.

Clock And Date Setting:

Set the clock and date in this page,save the setting before exit.

Notes: Save the setting after you reconfigurate the working mode or backlight setting.

Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet.

Grid Waveform:

This interface will show the real time grid waveform.The grid voltage and frequency also will show in this interface.

Energy Menu:

The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page.

AC Output Current Waveform and PF Test Of 2000W Model

Tested 2000W model at nearly full load,Output current waveform shows good pure sine wave in oscilloscope,PF value also shows in good result,99.8% PF value.

Advantages:

1. Advanced patented technology, MPPT efficiency is higher.
2. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years.
3. Each inverter need to pass twice testing (20 hours) before leaving factory.
4. Warranty: 2 years of free maintenance and replacement, lifetime technical support.
5. Low cost and easy installation .
6. Free combination.
7. Combination of SGPV does not interact.
8. Improving the efficiency of the entire solar power system.
9. Low power consumption.

Wifi Introduction

If you only want to buy the wifi plug alone,please click the following picture link:

You need to be sure that before you purchase a 2000w 2KW Wind Power Second Generation Grid Tie Inverter 2000G2-WAL-LCD With inter Limiter and Dump Load Controller/resistor you have previously seen and browse the detail of the products first. In this manner you can be sure that you are getting the right product that may suit your needs. Since this 2000w 2KW Wind Power Second Generation Grid Tie Inverter 2000G2-WAL-LCD With inter Limiter and Dump Load Controller/resistor has top quality it is one of the better sellers on the market now and several people are recommending this product to their family and friends. These days this product is actually affordable for nearly everyone and it’s a very good buy your money can buy. You don’t need cheaper products if it will only sabotage your work and can not give you the kind of quality that you need in the merchandise. With the higher price you could be sure that your cash is worth spending in this product.